1.8mtr x 1.83mtr (6ft high x 6ft wide) Easy Fit Featheredge Panel.
This is a very strong panel made entirely from pressure treated timber. We use heavier framework and thicker Featheredge boards than all other manufactures of a similar panel. It consists of a complete frame of 40mm x 40mm (1 1/2" x l 1/2") timber with two centre battens on 1.8mtr and 1.5mtr (6ft and 5ft) panels and only one on 1.2mtr and 900mm (4ft and 3ft) panels and a integral gravel board 40mm x 87mm (1 1/2" x 3 1/2") The panel is covered with 18 featheredge boards that are cut from 125mm x 22mm (5" x 7/8") timber to give a generous overlap and is complete with a 63mm (2 1/2") wide capping rail wide enough to cover the frame and boards.
We use Stainless steel nails to construct our fence panels.
This panel is also available in bow or dip top, scalloped top or scalloped top with trellis insert.
WILFIRS manufacture the highest quality & specification Featheredge Board Panels available in the UK no other manufacturer can match our full specification.
Our easy fit featheredge panels are designed at a reduced width and come with 2 removeable strips. This way you can place the panel into you existing slotted posts without lowering them in from above. Then by screwing through the panel into the strips you will make the panel up to the full width and it will secure itself in place.
Due to the quality of this panel & the amount of timber used in them this panel can weight up to the following:
6x6 - 47kg
5x6 - 40kg
4x6 - 33kg
3x6 - 25kg